Timber shear grab for telescopic: XYLOCUT 300
Ideal for mechanising branch cutting, for road sides maintenance, pruning…
Double function: combines the fonctions of a grip and a cutter.
Adaptable onto telescopic.
Cutting diameter 300 mm. branch or coppice cutting (difficult job with a chainsaw).
Ideal for hard woods: cutting power 20 Ton.
Clean cut: blade mounted on a mobile set allowing to stay on a pressure point on the tree and to guide the cutting process.
Hydraulic tilting: -18° / +85° according to the cylinder position.
Design combining lightness and sturdiness, with high yield strength steel
Compact and covered machine for an optimum protection of all the systems (hoses, valves...).
Lower grips allowing to hold the wood after the cutting and during the transport.
Model |
Grip / Cutter XYLOCUT 300 |
Coupling |
Telescopic |
Blade width |
300 mm |
Maximum cutting diameter |
300 mm |
Upper grips opening |
520 mm |
Lower grips opening |
450 mm |
Cutting power |
20 T at 180 bar |
Dimensions without coupling (L x W x H) |
1750 x 880 x 670 mm |
Weight |
504 kg |
Tilting |
From -18° up to +66° or from 0° up to +85° According to the cylinder position |
Hydraulic flow |
60 L/mn. mini. - 80L/mn. advised |
Double function: combines the fonctions of a grip and a cutter.
Adaptable onto telescopic.
Cutting diameter 300 mm. branch or coppice cutting (difficult job with a chainsaw).
Ideal for hard woods: cutting power 20 Ton.
Clean cut: blade mounted on a mobile set allowing to stay on a pressure point on the tree and to guide the cutting process.
Hydraulic tilting: -18° / +85° according to the cylinder position.
Design combining lightness and sturdiness, with high yield strength steel
Compact and covered machine for an optimum protection of all the systems (hoses, valves...).
Lower grips allowing to hold the wood after the cutting and during the transport.
Video 1
Video 2