THE V13 SWEEPER
![Capture[1]](https://gesproequipement.com/wp-content/uploads/2023/02/Capture1.jpg)
![V13-1800-GSV-2[1]](https://gesproequipement.com/wp-content/uploads/2023/02/V13-1800-GSV-21.png)
The V13 sweeper has a unique V-Concept® patented system that improves sweeping efficiency.
The orientation of the brushes in the shape of a “V” allows to gather the sweepings in the center of the sweeper and to remove the swaths which forced to cross the passages.
A sturdy design thanks to its thick folded steel structure.
Thirteen rows of solid polypropylene bristles 300 mm high including: 8 straight rows at the back, 3 rows forming a “V” at the front to accumulate waste in the center and 2 small rows at the tip of the “V” to create a more homogeneous distribution of waste and avoid accumulation of sweepings.
Very easily interchangeable brushes.
Les dimensions disponibles du balai pousseur Actisweep V13
Actisweep V-Concept 13-1500
L 1533mm x l 800mm x H300mm (Ref : CE86A001-A)
Actisweep V-Concept 13-1800
L 1840 mm x l 800 mm x H300 mm (Ref : CE86A001-B)
Actisweep V-Concept 13-2400
L 2440mm x l 800mm x H300mm (Ref : CE86A001-C)
Actisweep V-Concept 13-3000
L 3066mm x l 1050mm x H300mm (Ref : CE86A001-D)
Actisweep V-Concept 13-3600
L 3680mm x l 1050mm x H300mm (Ref : CE86A001-E)
Actisweep V-Concept 13-4800
L 4880mm x l 1050mm x H300mm (Ref : CE86A001-F)
The available adaptations
Standard Forks
- Adaptation for forklift forks
- Suitable for all types of forks of width and height lower than 195 x 70 mm
- Two sleeves equipped with a wedge with pin, allowing the sweeper to be fixed very quickly to the heel of the forks
- Hot-dip galvanized steel structure
Standard Bucket
- Universal adaptation for standard buckets and forks
- Suitable for all types of buckets and forks
- Composed of 2 steel parts fixed on the standard fork adaptation
- Hot-dip galvanized steel structure
Bale Clamp
- Universal adaptation for bale clamp and forklift forks
- Suitable for all types of clamps and forks
- Hot-dip galvanized steel structure
Euroquick
- Adaptation for loader with Euroquick quick coupler
- Equipment mounted on the adaptation of standard forks, allowing the brush to be used with forklift forks
- Hot-dip galvanized steel structure
Loader (crocodile clamp bucket)
- Universal adaptation for buckets and forks
- Suitable for all types of buckets and forks
- Heavy-gauge galvanized steel structure
3 Points
- Universal adaptation for tractors
- Direct fixing on traditional 3-point fasteners
- Equipment mounted on the adaptation of standard forks, allowing the brush to be used with forklift forks
- Hot-dip galvanized steel structure
The V13 sweeper options
Storage stand
- Allows to store the sweeper in height
- Allows to discharge the material after use
Angulation kit
- Allows to give an angle to the sweeper so as to put swathes on the sides
- 10 fixed positions on 360 °
- Hot-dip galvanized steel structure
Strengthened frame
- Very thick frame which protects the structure of the sweeper in the event of an impact
- Sturdy structure in hot-dip galvanized steel
Anti-scattering kit
- Sweep easily along sidewalks, curbs, walls
- Adds a second collection zone when the V is saturated
- Extends the sweeper by 15 cm on each side
Finishing brush kit
- The finishing brush kit allows a higher quality sweeping than the Standard bristle (red) thanks to a very fine bristle (for example sawdust, sand, dust such as cement, plaster, metal sanding, flour, potato ...).
- This option consists of 5 rows of brushes. It is available for all sweeper widths but will only be useful on the V13.