SplitMaster 30 TURBO on longitudinal chassis – Wood splitter

Maximum power for mobile applications

With a splitting power of 30 tons, the new SplitMaster can be used everywhere, and that with double the return speed: Thanks to the double-cylinder splitting system, the horizontal splitter manages to process 45 cm per second!
This does not just enable the faster processing of whole logs into billets, but the repeated splitting of billets that are too large can also be done faster than before.
Heavy logs are transported to the splitting passage via the hydraulic and powerful log lifting device – quite simply using the control panel! There is no more convenient, ergonomic and efficient way to process firewood.
  • Punch advance Autospeed as standard
  • TURBO model: double-cylinder splitting system, for double return speed and maximum hourly throughput
  • Billet length max. 125 cm
  • Cylinder stroke 130 cm
  • Max. billets/work cycle 8 pieces
  • Splitting knife for 4 parts as standard (Easy splitting knife optional)
  • Splitting knife adjustment hydraulic
  • Splitting stroke adjustable 130-60 cm
  • Splitting table height 80 cm
  • Longitudinal chassis
  • Rope winch manual or radio control optional

SplitMaster 30 TURBO with longitudinal chassis – Wood splitter

The professional horizontal splitter with maximum power for mobile applications. Not for use on public roads, only for use on private premises (e.g. Lumber yards).
standardprogramm
Article no. Type Propulsion Forward level
1 / 2 cm/s
Return
cm/s
Split
force t
Weight
kg
list price
excl. VAT
M8452NTG PZG

Tractor PTO shaft, power consumption 28 kWat 300-480 rpm, built-in oil pump with max. capacity 64 l/min

Tractor drive: universal shaft required

9/19 45 30 1607 14.700,00
M8457NTG E7.5D

3x 400V, 50Hz

7.5 kW e-motor 400V, S6, CEE 16A, dual-stage pump

E-drive: with motor circuit breaker and phase inverter

6/16 38 30 1557 15.300,00
M8462NTG E15D

3x 400V, 50Hz

15 kW e-motor 400V, S6, CEE 32A, dual-stage pump

E-drive: with motor circuit breaker and phase inverter

8/18 43 30 1602 16.600,00
M8467NTG PZG-E7.5D

3x 400V, 50Hz
  • Tractor PTO shaft
  • 7.5 kW e-motor 400V, S6, CEE 16A, dual-stage pump

Tractor drive: universal shaft required, E-drive: motor circuit breaker and phase inverter

  • 9/19
  • 6/16
  • 45
  • 38
30 1667 16.700,00
M8472NTG PZG-E15D

3x 400V, 50Hz
  • Tractor PTO shaft
  • 15 kW e-motor 400V, S6, CEE 32A, dual-stage pump

Tractor drive: universal shaft required, E-drive: motor circuit breaker and phase inverter

  • 9/19
  • 8/18
  • 45
  • 43
30 1702 17.900,00
Make inquiry now or find POSCH partners in your vicinity.
Wood splitter – Special equipment
Make your work routine easier with a series of useful additional pieces of equipment.
spezialprogramm
Article no. Description list price
excl. VAT
Y

(SO1024)
Surcharge SplitMaster with „Easy“ splitting knife and lumber pick (no 4-way splitting knife) 470,00
C

(SO1029)

Oil cooler recommended for continuous operation (from 4 hours) or for use above 30°C outdoor temperature. Advantage: longer service life of the hydraulic components due to less wear.

Attention! 3-pin continuous current plug 12V from tractor required

990,00
X

(SO1022)
Drawbar eye (low) with top Z-drive and/or customised drawbar height 250,00
L

(SO1037)
Light bar (for machines with LT tractor chassis) 590,00
A142 Individual permit / Individual type approval (EBE) for road admission, only possible for deliveries to Austria and Germany! 680,00
ST

(SO1217)
Stationary model without axle for stationary operation
FH

(SO1215)

Rope winch 750 radio and manually operated, pulling force 500 kg, rope 20 m. Unlimited rope pulling speed

Attention! 3-pin continuous current plug 12V from tractor required

2.770,00
HW

(SO1216)

Rope winch 750 manually operated, pulling force 500 kg, rope 20 m. Unlimited rope pulling speed

Attention! 3-pin continuous current plug 12V from tractor required

2.270,00
Splitting knife
Different splitting knife variants are avilable for efficient working.
standardprogramm
Article no. Description list price
excl. VAT
F0003141 Splitting knife „Easy“ with lumber pick 1.020,00
F0003074 2-way splitting knife 390,00
F0003075

4-way splitting knife (Ø 0-50 cm), standard

* centrally splitting log diameter

470,00
F0003044

6-way splitting knife (Ø 15-50 cm)

* centrally splitting log diameter

690,00
F0003069

8-way splitting knife (Ø 15-50 cm)

* centrally splitting log diameter

870,00
F0004533 Splitting knife 12-fold (ring Ø 250 mm), for max. Wood length / diameter of 50cm. Suitable for M84..N / NT. Models (absolutely necessary for 30t!). 1.490,00
Wood splitter – Accessory equipment
Handy accessory equipment for more power and convenience for wood processing.
standardprogramm
Article no. Description list price
excl. VAT
Z2000653 Walterscheid W-Line universal shaft 280,00
F0004131 Log support extension to split short logs 260,00
F0004130 Central lubrication for pressure unit, manual with hand pump 520,00
F0004148 Gripper tongs with torsional spring to rope winch, log Ø up to 65 cm. Weight ~7.6 kg 240,00
F0004149 Gripper tongs with torsional spring to rope winch, log Ø up to 80 cm. Weight ~8.8 kg 270,00
F0002605 Chain for cable puller, 1 m, 2-log hauling hook for 1,000 kg 145,00
F0004150 Light unit, attachable 180,00
F0001806 Hour counter for machines with PTO drive, includes rpm display 330,00
F0002179 Hour counter for machines with E-drive 130,00
F0004288 Retrofitting kit safety kit for SplitMaster models N/NS (3-point version, e.g. item no. M845NS) to be used by several people, consisting of three grids, grid bracket, widened timber support as well as safety valve (according to EN 609-1) 1.280,00
F0004289 Retrofitting kit safety kit for SplitMaster models NST/NT (longitudinal chassis version, e.g. item no. M845NST) to be used by several people, consisting of three grids, grid bracket, widened timber support as well as safety valve (according to EN 609-1) 1.280,00
Remote controls
standardprogramm
Article no. Description list price
excl. VAT
F0002888

Radio remote control “RC“, option E required

Machines with these control options may only be charged with a crane. The control must be installed by the customer at the charging site (crane, tractor).

2.000,00
F0002889

Radio-remote control, pedal “RCF“, option E required

Machines with these control options may only be charged with a crane. The control must be installed by the customer at the charging site (crane, tractor).

4.100,00
F0002885

Radio remote control “RCS“, option E required

Machines with these control options may only be charged with a crane. The control must be installed by the customer at the charging site (crane, tractor).

3.600,00
F0002886

Cable remote control “CC“, option E required

Machines with these control options may only be charged with a crane. The control must be installed by the customer at the charging site (crane, tractor).

950,00
F0002887

Cable remote control, pedal “CCF“, option E required

Machines with these control options may only be charged with a crane. The control must be installed by the customer at the charging site (crane, tractor).

1.750,00
E

(SO1030)

Pre-wired, additionally equipped with electrical control option for installation with a cable or remote control by the customer

The machine can be operated manually via the two-hand control unit

2.500,00
F0002884 Voltage converter RC/CC 230V-12V, option E required, only for electric drive 620,00

Questions? Contact us!

(Service in English)
Mélanie Faucher
819-313-7081
admin@gesproequipement.com

Administration and Sales
Sylvain Vouligny
819-372-6392
admin@gesproequipement.com