Saw benches with electric motor
Saw your logs in full equanimity and with the electric comfort thanks to the circular saw XYLOSCIE.
3 electric models for cutting diameters of 230 mm (on XYLOSCIE 600) or 280 mm (on XYLOSCIE 700).
Blade in carbide steel with alternate positioned teeth denture and with rigth/left angling of the teeth so that few power is needed and the cut is clean:
- Ø blade 600 mm on XYLOSCIE 600,
- Ø blade 700 mm on XYLOSCIE 700.
Safe and ergonomic stand sawhorse with holding clamp and handle.
Blade is fully covered by a casing with a mobile cover on the cutting area thanks to the rocking stand.
Controlled cutting length by a sliding rod (on XYLOSCIE 600) or by adjustable dead stop (on XYLOSCIE 700).
Machine stability with a centre of gravity lowered to the maximum and a strengthened machine-welded steel frame on XYLOSCIE 700.
Electric brake = blade stops in less than 10 seconds.
Discharge conveyor 4000 or 5000 mm (in option on XYLOSCIE 700) with metal bars.
Circular saws complying with safety norm NF EN 1870-6+A1.
Registration number XYLOSCIE 600 E: 0062/5457/012/10/2010/0001
Models |
XYLOSCIE 600 EM |
XYLOSCIE 600 ET |
XYLOSCIE 700 ET |
Maximum diameter with round log |
200 mm |
200 mm |
260 mm |
Maximum diameter with half-log |
300 mm |
300 mm |
375 mm |
Work dimensions (L x W x H) |
1220 x 780 x 1030 mm |
1220 x 780 x 1030 mm |
1360 x 970 x 1130 mm |
Blade diameter |
600 mm |
600 mm |
700 mm |
Type of teeth |
Carbide |
Carbide |
Carbide |
Weight |
102 Kg |
102 Kg |
209 Kg |
Log length control |
By sliding rod |
By sliding rod |
By adjustable stop end |
Drive |
Electric Single-phased 3.1 KW / 4.1 HP |
Electric Three-phased 4.2 KW / 5.6 HP |
Electric Three-phased 5.5 KW / 7.5 HP |
Thermal circuit breaker |
Yes |
Yes |
Yes |
Transportation |
2 wheels Ø 200mm + handle |
2 wheels Ø 200mm + handle |
Transportation carriage (in option) |
3 electric models for cutting diameters of 230 mm (on XYLOSCIE 600) or 280 mm (on XYLOSCIE 700).
Blade in carbide steel with alternate positioned teeth denture and with rigth/left angling of the teeth so that few power is needed and the cut is clean:
- Ø blade 600 mm on XYLOSCIE 600,
- Ø blade 700 mm on XYLOSCIE 700.
Safe and ergonomic stand sawhorse with holding clamp and handle.
Blade is fully covered by a casing with a mobile cover on the cutting area thanks to the rocking stand.
Controlled cutting length by a sliding rod (on XYLOSCIE 600) or by adjustable dead stop (on XYLOSCIE 700).
Machine stability with a centre of gravity lowered to the maximum and a strengthened machine-welded steel frame on XYLOSCIE 700.
Electric brake = blade stops in less than 10 seconds.
Discharge conveyor 4000 or 5000 mm (in option on XYLOSCIE 700) with metal bars.
Circular saws complying with safety norm NF EN 1870-6+A1.
Registration number XYLOSCIE 600 E: 0062/5457/012/10/2010/0001
XYLOSCIE 600 EM