Rolltischsäge UniCut The universal circular table saw
for Small Holding owners
and DIY-ers in the garden.
for Small Holding owners
and DIY-ers in the garden.
- 24 cm Cutting– Ø max.
- 165 kg Weight min.
Details
On the safe side
The basic UniCut model is equipped with an indestructible protective casing that protects your hands from accessing the saw blade. Yet you still work in a practical way: The transparent polycarbonate cover allows a good view of the circular saw blade and the working process.
UniCut in action >>>
The basic UniCut model is equipped with an indestructible protective casing that protects your hands from accessing the saw blade. Yet you still work in a practical way: The transparent polycarbonate cover allows a good view of the circular saw blade and the working process.
UniCut in action >>>
- Application: Sharpening and cutting saw
- Log diameter: up to 24 cm
- Saw blade: Ø 70 cm
- Large sawing table: 150 x 85 cm with ball-bearing table guide for easy maintenance
- Drive variants: Electric motor with direct or V-belt drive, tractor PTO via aluminium angular drive and V-belt
- Transport: Solid rubber wheels Ø 30 cm with electric drive or via the three-point suspension on the tractor with transport aid
- Possible yearly volume: 250 solid cubic metres
- Optional equipment firewood or longitudinal cut protection
- Accessories: chip extraction connection, hour counter, chassis
| Standard | ||||
| Article no. | Type | Propulsion | Weight kg | list price excl. VAT |
|---|---|---|---|---|
| M1119HSR | E5,5 3x 400V, 50Hz | 5.5-kW E-motor 400 V, S6, CEE 16 A E-drive: with motor circuit breaker and phase inverter | 172 | 2.610,00 |
| M1028HSR | KE5,5 3x 400V, 50Hz | 5.5-kW-E-Motor 400 V, S6, CEE 16 A, two high-performance V-belts E-drive: with motor circuit breaker and phase inverter | 190 | 3.140,00 |
| M1030HSR | KE7,5 3x 400V, 50Hz | 7.5-kW-E-Motor 400 V, S6, CEE 16 A, two high-performance V-belts E-drive: with motor circuit breaker and phase inverter | 202 | 3.510,00 |
| M1032HSR | KE9 3x 400V, 50Hz | 9-kW-E-Motor 400 V, S6, CEE 32 A, two high-performance V-belts E-drive: with motor circuit breaker and phase inverter | 215 | 3.810,00 |
| M1019HSR | Z | Tractor, PTO shaft speed 540 rpm, min. power required 7-11 kW Tractor drive: Universal joint shaft required, three-point linkage cat. I + II | 254 | 4.120,00 |
| M1037HSR | ZE5,5 3x 400V, 50Hz |
Tractor drive: Universal joint shaft required, three-point linkage cat. I + II, incl. transport aid, e-drive: with motor switch for braking and phase inverter | 297 | 4.950,00 |
| M1038HSR | ZE 7,5 3x 400V, 50Hz |
Tractor drive: Universal joint shaft required, three-point linkage cat. I + II, incl. transport aid, e-drive: with motor switch for braking and phase inverter | 303 | 5.550,00 |
| M1040HSR | ZE9 3x 400V, 50Hz |
Tractor drive: Universal joint shaft required, three-point linkage cat. I + II, incl. transport aid, e-drive: with motor switch for braking and phase inverter | 310 | 5.850,00 |
| Standard | ||||
| Article no. | Type | Propulsion | Weight kg | list price excl. VAT |
|---|---|---|---|---|
| M1119HSR | E5,5 3x 400V, 50Hz | 5.5-kW E-motor 400 V, S6, CEE 16 A E-drive: with motor circuit breaker and phase inverter | 172 | 2.610,00 |
| M1028HSR | KE5,5 3x 400V, 50Hz | 5.5-kW-E-Motor 400 V, S6, CEE 16 A, two high-performance V-belts E-drive: with motor circuit breaker and phase inverter | 190 | 3.140,00 |
| M1030HSR | KE7,5 3x 400V, 50Hz | 7.5-kW-E-Motor 400 V, S6, CEE 16 A, two high-performance V-belts E-drive: with motor circuit breaker and phase inverter | 202 | 3.510,00 |
| M1032HSR | KE9 3x 400V, 50Hz | 9-kW-E-Motor 400 V, S6, CEE 32 A, two high-performance V-belts E-drive: with motor circuit breaker and phase inverter | 215 | 3.810,00 |
| M1019HSR | Z | Tractor, PTO shaft speed 540 rpm, min. power required 7-11 kW Tractor drive: Universal joint shaft required, three-point linkage cat. I + II | 254 | 4.120,00 |
| M1037HSR | ZE5,5 3x 400V, 50Hz |
Tractor drive: Universal joint shaft required, three-point linkage cat. I + II, incl. transport aid, e-drive: with motor switch for braking and phase inverter | 297 | 4.950,00 |
| M1038HSR | ZE 7,5 3x 400V, 50Hz |
Tractor drive: Universal joint shaft required, three-point linkage cat. I + II, incl. transport aid, e-drive: with motor switch for braking and phase inverter | 303 | 5.550,00 |
| M1040HSR | ZE9 3x 400V, 50Hz |
Tractor drive: Universal joint shaft required, three-point linkage cat. I + II, incl. transport aid, e-drive: with motor switch for braking and phase inverter | 310 | 5.850,00 |
Special equipment
Valid for initial equipment, incl. assembly.
| ersatzteile | ||
| Article no. | Description | list price excl. VAT |
|---|---|---|
| R (SO1461) | “Roller bench saw” design to cut firewood (standard equipment on Article no. MxxxxHSR, otherwise please select special equipment U or L) | 0,00 |
| W (SO1342) | Surcharge for circular saw with a WIDIA circular saw blade Ø 70 cm, 42 teeth (F0004866), instead of the standard circular saw blade. Benefit: 50% higher cutting performance with hardwood, noise-reducing | 70,00 |
| L (SO1463) | “Longitudinal cut saw” design for longitudinal cut | 120,00 |
| U (SO1462) | “Sharpening and cutting saw” design for sharpening and cutting of logs/round timber | 0,00 |
| Y (SO1280) | Star-delta switching for the drive by way of generating set or soft start for directly operated tilting saw (suitable for 5.5 kW e-motors) | 165,00 |
| F0001817 | Tractor chassis 10 km/h, for Z/ZE-drive | 600,00 |
| ersatzteile | ||
| Article no. | Description | list price excl. VAT |
|---|---|---|
| R (SO1461) | “Roller bench saw” design to cut firewood (standard equipment on Article no. MxxxxHSR, otherwise please select special equipment U or L) | 0,00 |
| W (SO1342) | Surcharge for circular saw with a WIDIA circular saw blade Ø 70 cm, 42 teeth (F0004866), instead of the standard circular saw blade. Benefit: 50% higher cutting performance with hardwood, noise-reducing | 70,00 |
| L (SO1463) | “Longitudinal cut saw” design for longitudinal cut | 120,00 |
| U (SO1462) | “Sharpening and cutting saw” design for sharpening and cutting of logs/round timber | 0,00 |
| Y (SO1280) | Star-delta switching for the drive by way of generating set or soft start for directly operated tilting saw (suitable for 5.5 kW e-motors) | 165,00 |
| F0001817 | Tractor chassis 10 km/h, for Z/ZE-drive | 600,00 |
Accessory equipment
Handy accessory equipment for more power and convenience for wood processing.
| Standard | ||
| Article no. | Description | list price excl. VAT |
|---|---|---|
| Z2000635 | Walterscheid W-Line universal shaft | 260,00 |
| F0004865 | Log saw blade Ø 70 cm, 56 teeth, chromium alloy, as standard | 195,00 |
| F0004866 | Log saw blade Ø 70 cm, 42 teeth, WIDIA | 265,00 |
| F0002860 | Chip extraction connection Ø 10 cm for roller bench saw and UniCut with three- point linkage | 280,00 |
| F0004088 | Chip extraction connection Ø 10 cm for roller bench saw and UniCut with three- point linkage | 280,00 |
| F0003540 | Hour counter for machines with Z-/ZE-drive (Reed contact) | 450,00 |
| F0003534 | Hour counter for E-drive machines with 400V, HS model | 205,00 |
| F0004619 | “Sharpening and cutting saw” design for sharpening and cutting of logs/round timber. This device is attached to the base model as standard. Protective polycarbonate enclosure (swivelling) to secure danger area, incl. device that centres logs during cutting process | 860,00 |
| F0004620 | “Roller bench saw” retrofit kit to cut firewood: Protective metal enclosure to secure danger area. This device is attached to the base model as standard. | 860,00 |
| F0004621 | “Longitudinal cut saw” retrofit kit for longitudinal cut: Metal enclosure to secure danger area | 980,00 |
| Standard | ||
| Article no. | Description | list price excl. VAT |
|---|---|---|
| Z2000635 | Walterscheid W-Line universal shaft | 260,00 |
| F0004865 | Log saw blade Ø 70 cm, 56 teeth, chromium alloy, as standard | 195,00 |
| F0004866 | Log saw blade Ø 70 cm, 42 teeth, WIDIA | 265,00 |
| F0002860 | Chip extraction connection Ø 10 cm for roller bench saw and UniCut with three- point linkage | 280,00 |
| F0004088 | Chip extraction connection Ø 10 cm for roller bench saw and UniCut with three- point linkage | 280,00 |
| F0003540 | Hour counter for machines with Z-/ZE-drive (Reed contact) | 450,00 |
| F0003534 | Hour counter for E-drive machines with 400V, HS model | 205,00 |
| F0004619 | “Sharpening and cutting saw” design for sharpening and cutting of logs/round timber. This device is attached to the base model as standard. Protective polycarbonate enclosure (swivelling) to secure danger area, incl. device that centres logs during cutting process | 860,00 |
| F0004620 | “Roller bench saw” retrofit kit to cut firewood: Protective metal enclosure to secure danger area. This device is attached to the base model as standard. | 860,00 |
| F0004621 | “Longitudinal cut saw” retrofit kit for longitudinal cut: Metal enclosure to secure danger area | 980,00 |
