Skip to main content
Forestry mulching heads with mobile hammers for skid steer
The Designed to mulch grass, bushes and branches between 5-6 cm diameter.
After developing a wide range of forest shredders for excavators and tractors, the RABAUD company expands its offering wth a model of a forest shredder on a compact loader, the XYLOR SK.
Its adaptation to a loader of 50 to 90 HP allows it to work in challenging conditions such as rugged terrain, difficult-to-access areas, or steep slopes over a width of 1.30 meters to 2 meters, depending on the model.
This skid-mounted forest shredder is equipped with mobile hammers, ideal for shredding rather airy vegetation such as grass, bushes, debris, shoots, and branches between 5 and 6 cm in diameter. Its hammers are arranged helically on the rotor, thereby limiting power peaks and preventing premature wear of the hammers.
For a finer shred, this skid-mounted forest brush cutter also has a line of counter-knives.
The Hydraulic Block Control (HBC) system of our forest shredders on loaders optimizes their performance and productivity by regulating the flow, limiting pressure, and enabling a gradual braking of the rotor.
Its wear-resistant steel skids, a cast iron motor protected by a robust housing, and its front protection by a chain curtain make these skid-mounted forest shredders highly robust machines.
Its adaptation to a loader of 50 to 90 HP allows it to work in challenging conditions such as rugged terrain, difficult-to-access areas, or steep slopes over a width of 1.30 meters to 2 meters, depending on the model.
This skid-mounted forest shredder is equipped with mobile hammers, ideal for shredding rather airy vegetation such as grass, bushes, debris, shoots, and branches between 5 and 6 cm in diameter. Its hammers are arranged helically on the rotor, thereby limiting power peaks and preventing premature wear of the hammers.
For a finer shred, this skid-mounted forest brush cutter also has a line of counter-knives.
The Hydraulic Block Control (HBC) system of our forest shredders on loaders optimizes their performance and productivity by regulating the flow, limiting pressure, and enabling a gradual braking of the rotor.
Its wear-resistant steel skids, a cast iron motor protected by a robust housing, and its front protection by a chain curtain make these skid-mounted forest shredders highly robust machines.
On video : Forestry mulching heads with mobile hammers for skid steer
Main Features
- Can be mounted onto skid steer loaders from 50 HP up to 90 HP.
Universal fixed coupling (SAE J2513). - Helical rotor with a set of mobile hammers and counter-knives fitted in ”U-shape” for the best crushing.
- Cast-iron gear hydraulic motor with drain line.
- HBC system (Hydraulic Block Control) allowing the hydraulic flow regulation, limits the pressure and allows rotor progressive braking.
- Side drive by belts.
- Casing for the hydraulic motor.
- Rear roller-feel adjustable in height Ø 165 mm.
- Support pads with interchangeable and anti-wear material.
- Front protection with chains to prevent projections.
Technical characteristics
| Model |
| Skid steer loader power |
| Rotor type |
| Number of hammers |
| Counter-knives line |
| Crushing width |
| Average grinding Ø |
| Helical rotor |
| Rotor Ø (without/with tools) |
| Size of gear motor |
| Drain line |
| Drive |
| Oil flow |
| Maximum pressure |
| Dimensions (L x W x H) with swinging hitcht |
| Weight |
| XYLOR 1400 SK |
| From 50 HP up to 90 HP |
| Mobile hammers |
| 14 |
| 1 line |
| 1400 mm |
| 50 – 60 mm |
| Yes |
| 140 / 400 mm |
| 31 cm³ |
| Yes |
| 3 belts |
| 65 L/min recommended 150 L/min maxi. |
| 200 bar |
| 1,37 x 1,69 x 0,77 m |
| 665 kg |
| XYLOR 1600 SK |
| From 50 HP up to 90 HP |
| Mobile hammers |
| 16 |
| 1 line |
| 1600 mm |
| 50 – 60 mm |
| Yes |
| 140 / 400 mm |
| 41 cm³ |
| Yes |
| 3 belts |
| 90 L/min recommended 150 L/min maxi. |
| 220 bar |
| 1,37 x 1,89 x 0,77 m |
| 690 kg |
| XYLOR 2000 SK |
| From 50 HP up to 90 HP |
| Mobile hammers |
| 22 |
| 1 line |
| 2000 mm |
| 50 – 60 mm |
| Yes |
| 140 / 400 mm |
| 56 cm³ |
| Yes |
| 3 belts |
| 110 L/min recommended 240 L/min maxi. |
| 220 bar |
| 1,37 x 2,29 x 0,77 m |
| 790 kg |
Swinging hitch
Hydraulic sideshift +/- 200 mm (additional dual-effect valve needed)
