Skip to main content
Kerbstones edging layer with vacuum : POSE BORD’AIR
Air kerbstone edging layer suitable for use on forks. It works by air suction thanks to the different suction cups according to the type of kerb : T2 – T3 – CS1 – CS2 – CS3. The installation of kerbs is fast, precise and effortless.
The BORD’AIR curb laying device by air suction fits on the forks of a variety of hydraulic machines such as telehandlers, forklifts, or loaders. Thanks to this feature, move the machine and the material palette simultaneously as close as possible to your work area. By reducing handling in this way, you save time and increase efficiency on all your construction, landscaping, or roadworks sites.
Easy to operate, this handling tool can lift all types of smooth curbs up to 160 kg in concrete or low-grain granite, thanks to a powerful air suction system that allows the curb to adhere to the suction cup.
With its tiltable mast for perfect alignment and the 360° rotation of the suction cup, the operator can precisely place the curb along a chalk line or in tight spaces.
The hydraulic handle with decompression trigger makes it easy to guide the trajectory and the ascent/descent of the curb.
Versatile, the BORD’AIR laying tool offers a wide range of suction cups to adapt to your curb types.
Quiet and ergonomic, it is ideal for use in city centers.
Easy to operate, this handling tool can lift all types of smooth curbs up to 160 kg in concrete or low-grain granite, thanks to a powerful air suction system that allows the curb to adhere to the suction cup.
With its tiltable mast for perfect alignment and the 360° rotation of the suction cup, the operator can precisely place the curb along a chalk line or in tight spaces.
The hydraulic handle with decompression trigger makes it easy to guide the trajectory and the ascent/descent of the curb.
Versatile, the BORD’AIR laying tool offers a wide range of suction cups to adapt to your curb types.
Quiet and ergonomic, it is ideal for use in city centers.
On video : Kerbstones edging layer with vacuum : POSE BORD’AIR
Main Features
- Installs smooth kerbs (concrete or fine-grain granite) weighing up to 160 kg.
- Adaptable to all types of hydraulic machine with fixed forks, flow rate from 30 l/min to 130 l/min thanks to the flow divider adjustable from the edger.
- 12-volt power supply for hydraulic turbine and mast tilt.
- 2 m suction hose with 360° swivel and swivel joint.
- Choice of 5 suction cups options to suit your kerb types : P1 – P2 – P3 – T1 – T2 – T3 – T4 – AC1 – AC2 – A1 – A2 – CC1 – CC2 – T2 – T3 – CS1 – CS2 – CS3.
- 360° rotatable suction cup with 4 locking positions.
- Hydraulic up/down control by handle and decompression trigger.
- Hydraulic tilt with automatic right/left mast tilt adjustment.
- Quiet and ergonomic, ideal for city use.
- Shaft with 4 axles for a perfect perpendicularity when lifting.
- Dust cleaning system with filter.
- Safety: vacuum gauge + adjustable brake on arm rotation + shrouded suction unit.
- Option : thermal engine.
Technical characteristics
| Model |
| Dimensions (L x W x H) |
| Lifting power |
| Power of vehicle |
| Hydraulic flow minimum maximum |
| Load on the forks |
| Frame forks holder |
| Tilting mast |
| Arm amplitude |
| Weight |
| POSE BORD’AIR |
| 1,54 x 1,55 x 2,52 m |
| 160 kg |
| 2 Tons |
30 l/min 130 l/min |
| 1500 kg max. |
| 190 x 65 mm |
| +/- 10° |
| 2,21 m |
| 495 kg |
Vertical suction cup with a joint in foam P1 – P2 – P3
Suction cup number 1 with a joint in foam with internal sensor T1 – T2 – T3 – T4
Suction cup number 2 with a joint in foam with internal sensor AC1 – AC2 – A1 – A2
Suction cup number 3 with a joint in foam with internal sensor CC1 – CC2
Flat suction cup with a joint in foam with internal sensor T2 – T3 – CS1 – CS2 – CS3 (included as standard)
